Categories

Heaters
- Nozzle bands
- Barrel Bands
- Cartridge Heater
- Coil Heater
- Flexible Heater
- Budget Nozzle Bands
Thermocouples
- Adjustoflex Thermocouples
- Bayonet type
- Nozzle type
- Tube type
- Washer type
- Leaf type
- Spade Type
- Ring type
- Jubilee Type
- OEM Style Thermocouples
- Negri and Arburg type
- Pin type
- Thermocouple adaptors
- Thermocouple Accessories
- Mineral Insulated Hot Runner thermocouples
- Melt probe thermocouples
Wiring & Accessories
- Electrical Wire
- Thermocouple Wire
- Plug & Sockets
- Wiring Insulation and tape
- Butt splices and terminal lugs
Temperature control
- Hot Runner Controllers
- Hot Runner Controller Cables
- Hot Runner Controller Accessories
- Thermometers & Probes
- Multi Meter
- Temperature Controller
- Thermostat
Gate Cutters
- Gate Cutters - Flat Face
- Gate cutters- round back
- Angled cutters
- ergonomic cutters
- Economy Gate Cutters - Flat Face
- Special Purpose Pliers
- Mini cutters
- Spare Pliers Springs
- Heated Pliers
  - Heated gate cutter
  - Heated gate cutter power supply
Tools and Equipment
- Pneumatic Pliers
- Bronze Pliers
- Wrist support
- Trimming Knives
- Mould Tools
- De-burring Tools
  - De-burring Tools
  - De-burring Spare Blades
- Files
- Other tools & accessories
Workshop Supplies
- Silicone Grease
- Sprue Remover
- Vacuum and conveying
  - Vacuum Guns & Accessories
- Air Gun
  - Blow Guns
- Air Hose
- Pressure Gauges
  - Air Gauge
- Cleaning Brushes
- Brushes
- Scotchbrite
- Copper Gauze
- Absorbent Materials
  - Spill socks
  - Spill mats
- Health and Safety
- Weigh Scale
- Workshop accessories
  - Multimeter
  - Metal Marker
- Storage Kegs
Mould Sprays
- Ambersil Spray Selection Guide
- Mould Release
- Mould Protector
- Mould & Workshop Cleaner
- Lubricant & grease
- Other sprays & compounds
Purge Compound
Clamps, Magnets
- Forged Mould Clamps
- Clamp Accessories
- Bolts, Nuts, Studs
  - Hex Bolts
  - Cap Screws
  - Hex Nuts
  - T-Nuts
  - T-Bolts
  - Studs
  - Hex Wrench
- Lifting Accessories
- Tie Bar Protector
  - Tie Bar Cover
- Chutes, Curtains, Skirts
  - Mould Chutes & Skirts
  - Mould Curtains
- Hopper Magnets
- Machine Mounts
- Barrel Insulation Jackets
- Nozzle Drool Discs
Waterline & Cooling
- Water Connectors & Plugs
- Pipe fittings and couplers
- PTFE tape & sealant
  - PTFE Tape
  - Pipe sealant
- Water Hose & Accessories
- Hose Cutter
- Ball Valves
- Water Regulators
- Manifolds, water
  - Stainless manifolds
  - Aluminium Manifolds
- Flow Meters
- Airline hose & fittings
- Water Filter & descaling
  - Descaling pump
  - Water filter (magnetic)
- Knockout Couplings
Removable nozzles & tips
- Nozzle Tips- Removable
- Nozzles for removable tips
- Nozzle/Hot Runner Leak Detection
Nozzle/Hot Runner Leak Detection
Special Nozzles
- Shut off nozzles
- Mixing nozzles
- Screen pack Filter Nozzles
- Cylinder filter Nozzle
- Dispersion disk filter nozzle
- Internally Heated Nozzles
- Solid Nozzles
- Oversize Nozzles
- Nozzle order form
- Barrel End Caps
- Nozzle Installation Tools
  - Nozzle Wrench
  - Radius Gauge
Screwtip valves
- Screw Tip Assemblies
- Smear Tips
- Ball Check Valves
- Screwtip order form
Feedscrews & Barrels
- Screw & Barrel Refurbishment
- New Screws & Barrels
Ancillaries
- Hopper Loaders
- Hopper Dryers
- Granulators
Mould Polishing
- Work Benches
- Work seat
- Polishing table
- Inspection lighting
- Inspection equipment
Robotics, EOAT
Other

Nissei Removable Tip Nozzles

Nissei Nozzle Body

Nozzle body with thread to suit your machine. 1¹/₂" body diameter accepts standard heater bands and ⁷/₈"-14 female thread at front to accept removable nozzle tips. Pre heat-treated steel machined to suit the thread of your machine and accept standard low-cost replacement tips.

Any size or specification made to your requirements. Simply find your machine thread below for part number:
To order special nozzles, or sizes not shown above, click here or please call sales office 01536 206653

Thread	R/O	Part No	Machine Model
40x2	20mm	NG	9A, 12A, 18A
50x2	25mm	NJC	50A, 71A, 100A, FS250

Part Number	Length (mm)	Part no	Price £	Quantity
NG	125	NG5	125.00	- +
NG	150	NG6	136.00	- +
NG	175	NG7	145.00	- +
NG	200	NG8	165.00	- +
NJC	250	NJC10	206.00	- +